0

Closed Loop Corrosion Inhibitor

Closed Loop Corrosion Inhibitor
Closed Loop Corrosion Inhibitor
Price And Quantity
  • 50
  • Kilograms/Kilograms
  • 50.00 - 500.00 INR
Product Specifications
  • Liquid
  • Industrial Grade
  • 99%
  • Water Treatment Chemical
  • Recycling Water Treatment
Product Description

Being a coveted firm, we are indulged in manufacturing Closed Loop Corrosion Inhibitor. Offered chemical is used in removing dissolved oxygen that may react with metal and cause oxidation. Our manufactured chemical helps in preventing scaling of the plant and protects copper from corrosion. Closed Loop Corrosion Inhibitor is widely used in hot water circuit, glycol brine system, engine jacket and chiller water circuit.

Other Information:

Closed Loop or Closed Circuit Cooling or Heating Systems that use water for heat transfer must meet the following three mandatory requirements:-

  • Using Soft, DM or RO water for feed and make up

  • An appropriate Corrosion Inhibitor with yellow metal protection, oxygen scavenger, added with antiscalant.

  • A suitable chlorine free Biocide for preserving water.

If the above requirements are met then the following sure shot benefits are rewarded to the system operator:-

  • Zero or negligible loss of metal or corrosion

  • Excellent heat transferability

  • Consistent flow rate

  • No need of descaling closed circuit equipments

  • Long and extended life of Water without fouling

And the disadvantages of not treating the closed circuit water can be equally troubling for the system operator:-

  • Leakage in PHE and AHU due to corrosion

  • Plugging and clogging of tubes and reduced flow rate

  • Reduced heat transfer

  • Need of regular descaling that incurs shutdowns, loss of labor and time

  • Fouling and decoloring of water to red or black

Chemical treatment removes dissolved oxygen that cause oxidation of metal to metal oxide i.e, Iron + Oxygen = Iron Oxide (Rust)
The chemical also contains a specific inhibitor to protect copper from corrosion and removes / prevents any sort of scale formation in the system.

Chemtex's Closed loop Corrosion Inhibitor surpasses the performance of other such less effective closed loop treatment chemicals such as (Nalco 8338, Nalco 3275, Indion 5547 etc.)

Application:

Engine Jacket, Chiller Water Circuit, Glycol Brine System, Hot Water Circuit, Engine Coolant, Process chilling and heating etc.

Chemical Type

Organic Chemical Compound

Form

Liquid

Specific Gravity

Ranges from 1.0 - 1.2 depending upon product

pH

12+-1

Solubility

Completely Soluble in Water

Dosage:

Closed Loop Corrosion Inhibitor is normally fed continuously to the re-circulating closed system by injection dosing pump or dosed to the expansion tank. The amount of chemical required to inhibit corrosion depends on the type of system and plant operating conditions. The specific dosage rates will be specified by the CSL technical representative.

Major Benefits

  • Zero or negligible loss of metal or corrosion

  • Excellent heat transferability and flow rate

  • No need of descaling closed circuit equipments

  • Long and extended life of Water without fouling

Trade Information
  • Cheque
  • 200000kg Per Day
  • 3 Days
  • Yes
  • Free samples are available
  • South India
    Contact Us

    Haute Street Corporate Park, 86A, Topsia Road (S), Haute Street, Kolkata, West Bengal, 700046, India
    Phone :+918037402442